2025 Ventrac 45RC Base

2025 Ventrac 45RC

Our engineering team has pushed the limits of the renowned 4000 series slope mower and have developed the all-new Ventrac 45RC. Tackle steep terrain - whether you are in the seat operating or up to 500 feet away with the remote control.

Features may include:

Kubota

500ft

Transports Fast, Protects Turf, Operates Smoothly

In Remote Mode

Operator On & Remote

The right joystick controls the machine speed and direction of travel, along with raising and lowering the front hitch.

The forward or backward movement of the right joystick controls the direction of the machine. The amount of forward or backward movement combined with the v-trim setting controls the ground speed of the machine.

The side-to-side movement of the joystick controls the front hitch. Move the joystick to the left to raise the front hitch. Move the joystick to the right to lower the front hitch.

The left joystick controls the machine steering and the auxiliary hydraulic quick couplers.

Move the left joystick to the left or right to steer the machine left or right. The forward or backward movement of the left joystick controls the selected set of front hydraulic quick couplers.

The start button is used to turn on and connect the remote control to the machine.

Press the horn button to sound the signal horn. The horn will sound until the button is released.

The multifunction switch can be rotated to scroll through the display menu and settings and pushed to make a selection.

Press the engine start button to engage the starter. Release the button when the engine has started.

Press the throttle up button to increase the engine speed.

The display view selector switches the screen view between the standard machine status screen and the camera view (if equipped).

The auxiliary coupler selector switch toggles the auxiliary coupler control between the red and yellow couplers and the black and white couplers.

Move the switch forward to turn on power to the 4-pin front socket. Move the switch backward to turn off power to the 4-pin front socket.

Press the switch to engage the parking brake. The light next to the switch will light up when the parking brake is engaged. Press the switch again to disengage the parking brake.

Press the switch to engage the electric clutch and send power to the front attachment. The light next to the switch will light up when the PTO clutch is engaged.

Press the switch again to disengage the clutch and stop the attachment.

Press the switch to engage the float function of the front hitch. The light next to the switch will light up when the float function is engaged.

To disengage the float function, press the switch again or raise the attachment off the ground.

Push the switch forward to spool out cable from the winch. Pull the switch backward to winch in the cable.